- Teensy 3.5 with Pins:
- Get a brand new board from here
- USB cable to connect the Teensy to your computer
- A RetroSpy Xbox 9000 cable. Do one of the following:
- Buy a pre-made cable from the RetroSpy storestore
- Make you own using the instructions under Wiring – No Soldering Required
- Xbox 9000 extension cable
- DB9000 Male Breakout Board
- Wires connect to the breakout board, like these
- Make you own using the instructions under Wiring – Soldering Required
- Xbox 9000 extension cable
- Wires to solder into the controller extension cable to go to the Arduino, like these
- Wire cutters/strippers
- Soldering iron and solder
- Electrical tape and/or heat shrink tubing
- Digital multimeter or a cheap continuity tester
zoggins
Owner and primary developer of RetroSpy.
Recent Comments