0-Needed Items – Pi Pico – No Solder with 2 components

zoggins01/11/2022Comments are off for this post

Raspberry Pi Pico
USB cable to connect the Teensy to your computer
A RetroSpy Xbox 9000 cable. Do one of the following:
- Make you own using the instructions under Wiring – No Soldering Required
  - Xbox 9000 extension cable
  - DB9000 Male Breakout Board
  - Wires connect to the breakout board, like these
- Make you own using the instructions under Wiring – Soldering Required
  - Xbox 9000 extension cable
  - Wires to solder into the controller extension cable to go to the Arduino, like these
  - Wire cutters/strippers
  - Soldering iron and solder
  - Electrical tape and/or heat shrink tubing
  - Digital multimeter or a cheap continuity tester

zoggins

Owner and primary developer of RetroSpy.